Accessories
PVC membrane adhesive
ADHESIVE is used for gluing holders in plastic to PVC membrane roofing.
Substrate and ambient temperature during application and binding should be from +15°C to +25°C
Drying time: about 10 - 30 min.
Method of application:
The surfaces should be thoroughly degreased.
Mix the content of the bucket.
Apply the adhesive with a brush on both sides on the surfaces.
Wait 10 min.
Check it with your finger (there should be no wet spots on the surface).
Place the holder and press it firmly against the roofing.
Properties:
has excellent adhesive properties,
has very good adhesion to the PVC membrane,
resistant to weather conditions, high and low temperatures,
resistant to short and long-term aging,
easy and quick to use, can be applied with a brush
Substrate and ambient temperature during application and binding should be from +15°C to +25°C
Drying time: about 10 - 30 min.
Method of application:
The surfaces should be thoroughly degreased.
Mix the content of the bucket.
Apply the adhesive with a brush on both sides on the surfaces.
Wait 10 min.
Check it with your finger (there should be no wet spots on the surface).
Place the holder and press it firmly against the roofing.
Properties:
has excellent adhesive properties,
has very good adhesion to the PVC membrane,
resistant to weather conditions, high and low temperatures,
resistant to short and long-term aging,
easy and quick to use, can be applied with a brush
Warning!
When placing an order, please provide the symbol.
roof adhesive mass
The adhesive mass is used for gluing plastic holders to roofing felt.
Substrate and ambient temperature during application and bonding: from +5°C to +25°C
Drying time: 24h
Method of application:
1. Thoroughly mix the content of the bucket.
2. Apply a small amount of glue to the holder with a spatula and the
place where holder should be glued using the "glue to glue" method.
3. Wait 20 minutes.
4. Place the holder and press it against the roofing.
Properties:
modified SBS,
has excellent adhesive properties,
has very good adhesion to the roofing felt,
resistant to weather conditions, high and low temperatures,
resistant to short and long-term aging,
easy and quick to use
!!! CAUTION!!!
Do not use to cover PVC, EPDM membranes.
Substrate and ambient temperature during application and bonding: from +5°C to +25°C
Drying time: 24h
Method of application:
1. Thoroughly mix the content of the bucket.
2. Apply a small amount of glue to the holder with a spatula and the
place where holder should be glued using the "glue to glue" method.
3. Wait 20 minutes.
4. Place the holder and press it against the roofing.
Properties:
modified SBS,
has excellent adhesive properties,
has very good adhesion to the roofing felt,
resistant to weather conditions, high and low temperatures,
resistant to short and long-term aging,
easy and quick to use
!!! CAUTION!!!
Do not use to cover PVC, EPDM membranes.
Warning!
When placing an order, please provide the symbol.
| weight (kg) |
usage | |
|---|---|---|
|
symbol type |

